Style Australia & New Zealand

Painting your house: The Floor to Ceiling Guide


Paint is one of the simplest and most flexible ways to lend your personal signature to any room. It can add warmth, create a mood, hide imperfections, emphasize your personal taste and simply reflect your personality. Paint transforms a basic space into your cherished home. If you carefully plan and execute the job it is definitely well worth the effort.

Painting Yourself vs Using a professional

When you're painting your house, investment or residential property, it's worth deciding whether you're going to complete the work yourself of get the help of a qualified residential painter.
Even though many home owners choose to paint there own house, normally this is based on the cost of using a professional painter. Even though they're more expensive, there are many benefits to choosing a certified painting professional:

  • Quality Of Work
  • Warranty
  • Speed
  • Safety
  1. Step 1: Preparations
  2. Step 2: The right brush/roller
  3. Step 3: Colors
  4. Step 4: Painting the ceiling
  5. Step 5: Painting the interior walls
  6. Step 6: Care for the brush/roller during break or after the work is finished.



  • Household cleaners
  • Paint remover/stripper
  • Spackle, patching compound
  • Paintable caulk
  • Primer
  • Paint (depending on application)
  • Brush/Roller cleaner
  • Thinner
  • Turpentine
  • Kooyman All Clean©
  • Aquafix©


  • Sponge
  • Putty knife
  • Caulking gun
  • Dust mask
  • Sand paper fine and rough
  • Paint coverall
  • (plastic) glove
  • Protective goggle
  • Paint scraper
  • Screwdriver
  • Tape measure
  • Tack cloth
  • Masking tape
  • Drop cloth
  • Trim guard
  • Brushes (depending on application)
  • Paint rollers covers (depending on application)
  • Roller frame
  • Roller tray
  • Roller extension pole
  • Paint paddle


  • • Accurately calculate the required amount of paint:
  • • To calculate the surface area of a room multiply the height of each wall by its width and add all wall areas together;
  • • Multiply the height of each window and door by its width and add all window and door areas together;
  • • Subtract total window and door area from total wall area to get the square meters of the surface needing paint;
  • • After you have calculated your paint area you can always consult with a Kooyman paint expert for the quantity of paint needed.
  • • Identify what other materials you need; for this use the checklist at the end of this manual;
  • • Start with a clean surface. Dirt, oil and grime on a surface will prevent paint from adhering properly. A thorough cleaning is thus an important part of the preparation process.
  • • After degreasing and cleaning, we advize to sand the surface so the paint can stick well to the wall or ceiling. Always sand after cleaning so dirt and grease won’t be sanded into the wall or ceiling. We advise to use a wall sealer/primer. Wall sealer/primer will cover marks, stains and repair work. Also wall sealer improves the adhesion of the new coat of paint and thereby the end result of your paint job.

The right brush/roller


Always choose a brush that matches the paint and the surface. Dip a new clean brush till the first half of the hairs in the paint. Then run it tightly along the can. Always dip the brush in the paint up to the first third in the paint when painting, this will prevent it from leaking. Apply the brush immediately after you have dipped it in paint, to the surface, Holding the brush between your fingers.


Choose the right roller for each paint job. A roller that is rounded on both sides is perfect for topcoats or smoother surfaces. There will be no stripes if the roller is round on both sides. A paint tray and a roster will make painting with a roller much easier. Fill the deep section of the tray with paint. Make sure that higher ribbed part is not covered with paint. Saturate the roller well with paint first and then roll it out along the ribbed part of the paint tray.


By using certain colors on walls you can give an optical change to the space. Bright, cool colors such as light blue ensure a wider appearance of the space. Warm, light colors such as yellow will brighten up your house and give your walls a fresh touch. For larger spaces to show more warmth and a cozier appearance, paint the walls in warm, dark colors, such as brown or red-orange. As for painting of the ceiling, a light color will make it seem higher. Dark colors will give the appearance of an optical reduction, especially in older homes with high ceilings. This optical reduction can also be emphasized if there is a border of this color painted on the wall.

Painting the ceiling

When painting, always start with the ceiling because there is a chance that the paint can drip and ruin an already painted wall. All sides and transitions should be painted with a flat brush. Do these first to ensure straight lines.
After you have painted the sides and transitions proceed with the rest of the ceiling.

Painting the interior walls

Start painting the wall where the ceiling meets the wall or trim. Avoid brush marks and overlaps by maintaining a wet edge when you paint. Always paint from dry surfaces to wet surfaces. If you are using a latex paint, keep moving. Do not go back repeatedly into already painted areas. Once the edges have been cut in with paint, use a roller with an extension handle to paint the rest of the wall.
Paint the walls in “W” strokes with the roller. Then apply the paint in straight lines so to cover the space equally. If the ceiling has a different color than make sure you use painter’s tape.

Care for the brush/roller

When you start painting a room try to finish as soon as possible but if this is not the case than do the following: with a short break you can just leave the brush on the lid (upside down) or if it is for a long break, put the rollers and brushes in an plastic bag closed airtight.
If you have remaining paint and the can is at least half full, you can save your paint in the following way; Close the lid securely then hold the can upside down just so the edge fills up with paint. The can is sealed, this will prevent skinning. If the remaining paint in the can is less than half, then put the rest into a smaller can. Do the same as the above method.